Filter
Top Products
• When you change the connections, all devices should be turned
off
.
• Refer
to
the owner's manual accompanying external devices for more information.
2 Channel Analog Audio
Connection
Digital Audio
Connection
Dolby Digital
decoder
stereo
system
analog
audio
input
jacks
COAXIAL
digital
audio
coaxial
input
jack
RCA
audio cable
DlGlTAL
AlJOlOOUT
COAXIAL
ova
digital audio
coaxial cable
AUDIO
OUT
DIGITAL
AUDIO
OUT
*MD deck or
DAT
deck
can
be also connected through coaxial jack.
S r d bl
d'
th'
ct'
f
II
.
•
RCA
audio cable
(LlR)
x 1 _
Please
purchase the rest
of
the necessary cables at your local store.
Multi Channel Digital Audio
Setting
Setup
>General
Setting
>Playback >Audio
Out>
Dolby Digital
If
output
is
Dolby Digital encoded audio, connect
to
a Dolby Digital decoder.
If
output
is
DTS
encoded audio, connect
to
a
DTS
decoder.
If
output
is
encoded audio for both Dolby Digital and
DTS,
connect
to
the decoder which encodes multiple
audio sources.
Connecting
to
an
MD deck or
DAT
deck.
If
not
connected
to
any external devices.
Stream
OFF
PCM
ON
Stream
ON
PCM
OFF
PCM
OFF
*
To
complete these settings, refer
to
page 89.
Note
• The
DVD
AUDIO
OUT
and
DIGITAL
AUDIO
OUT
jacks are only useful in
DVD
mode.
• The audio source on a disc in a Dolby Digital
multi
channel surround format cannot be recorded
as
digital sound
by an MD or DAT deck.
•
By
connecting this
unit
to
a Dolby Digital decoder, you
can
enjoy
high~qualityP9lbyDigital
murtfchanrel
·w
surround sound
as
heard in the movie theaters. . "
'.
,-
"
.•
~;,
~
•
By
connecting this
unit
to
the
DTS
decoder, you can enjoy Multi-channel Surround System which reproduces
the
original sound
as
truthfully
as
possible. Multi-channel Surround System
is
developed
by
the
DTS,lnc.
• Playing back a
DVD
using incorrectsettings may generate noise distortion and may also damage
the
speakers.
24
EN