2-15
u Angle Units, Coordinate Conversion, Sexagesimal Operations (ANGLE)
[OPTN] - [ANGLE]
• { ° } / { r } / { g } ... {degrees}/{radians}/{grads} for a specific input value
• { ° ’ ” } ... {specifies degrees (hours), minutes, seconds when inputting a degrees/minutes/
seconds value}
• {
° ’ ”
} ... {converts decimal value to degrees/minutes/seconds value}
• The {
° ’ ”
} menu operation is available only when there is a calculation result on the display.
• { Pol( } / { Rec( } ... {rectangular-to-polar}/{polar-to-rectangular} coordinate conversion
• { 'DMS } ... {converts decimal value to sexagesimal value}
u Engineering Symbol (ENG-SYM) [OPTN] - [ENG-SYM]
• { m } / {
} / { n } / { p } / { f } ... {milli (10
–3
)}/{micro (10
–6
)}/{nano (10
–9
)}/{pico (10
–12
)}/{femto (10
–15
)}
• { k } / { M } / { G } / { T } / { P } / { E } ... {kilo (10
3
)}/{mega (10
6
)}/{giga (10
9
)}/{tera (10
12
)}/{peta (10
15
)}/
{exa (10
18
)}
• { ENG } / { ENG } ... shifts the decimal place of the displayed value three digits to the {left}/{right}
and {decreases}/{increases} the exponent by three.
When you are using engineering notation, the engineering symbol is also changed
accordingly.
• The {ENG} and {ENG} menu operations are available only when there is a calculation result
on the display.
k Angle Units
• Be sure to specify Comp for Mode in the Setup screen.
Example Operation
To convert 4.25 rad to degrees:
243.5070629
!m(SET UP) cccccc 1(Deg) J
4.25 K6( g) 5(ANGLE) 2(r) w
47.3° + 82.5rad = 4774.20181°
47.3 +82.5 K6( g) 5(ANGLE) 2(r) w
2°20´30˝ + 39´30˝ = 3°00´00˝
2 K6( g) 5(ANGLE) 4(° ’ ”) 20 4(° ’ ”) 30
4(° ’ ”) +0 4(° ’ ”) 39 4(° ’ ”) 30 4(° ’ ”) w
5(
° ’ ”
)
2.255° = 2°15´18˝
2.255 K6( g) 5(ANGLE) 6( g) 3( 'DMS) w
