Filter
Top Products
20 3M™ MicroTouch™ Software MT 7 User Guide
3M Touch Systems, Inc. Proprietary Information – 25695M
Double-Click Speed (not available on Windows® CE or Linux®)
Double-click speed defines how quickly you must touch the sensor for the system to
interpret your actions as a double-click. Set the double-click speed in the slow to medium
range for optimum performance with a touch sensor.
Touch the globe twice to test the double-click speed and area settings. If the globe begins
to spin, the sensor recognized your touch as a double-click.
Note: Changing this setting will affect the double-click setting of the mouse.
Double-Click Area (not available on Windows® CE or Linux®)
Double-click area defines the space in which you must touch the sensor for the system to
interpret your actions as a double-click. Set the double-click area in the medium to high
range for optimum performance with a sensor.
Touch the globe twice to test the double-click speed and area settings. If the globe begins
to spin, the sensor recognized your touch as a double-click.
Note: Changing this setting will affect the double-click setting of the mouse.
Edge Adjustment Tab
Once you calibrate the sensor, the cursor should be located directly beneath your finger
when you touch the sensor. However, this may make it difficult to touch items at the very
edges of the sensor. The Edge Adjustment tab enables you to define an offset area in
which the cursor moves closer to the edges of the sensor so you can easily and more
precisely select small items, such as single words, the Windows® Start button, check
boxes, or radio buttons.
For example, if you have a row of buttons along the left edge of your sensor, you may
want to set an edge adjustment to enable users to easily activate these buttons. Because
each edge is independent of the other, you only need to adjust the left margin to
accommodate this row of buttons.