Filter
Top Products
8-EN
Getting Started
Turning Power On and Off
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except eject
c and .
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
• The first time power is turned on, the volume will start from level 12.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after installing the CD changer, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET with a ball-point pen or similar
pointed object.
Setting the Time and Calendar
1
Press MENU.
2
Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.
The main SETUP menu is displayed.
3
Select GENERAL by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under GENERAL.
The GENERAL SETUP menu is displayed.
4
Select CLOCK ADJUST by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under CLOCK ADJUST.
5
Select “Year” by sliding your finger on the
GlideTouch bar to the left or right.
6
Adjust “Year” by turning the Rotary encoder.
7
Adjust “Month”, “Day”, “Hour” and “Minute” by
turning the Rotary encoder by repeating steps 5
and 6.
8
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder for at least 2
seconds after setting the “hour.” Minutes will reset to 00.
If the display shows over “30” minutes when you do this, the time
will advance to the nearest hour.
•IfMENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no operation is performed for 60 seconds, the unit will return to
the normal mode.
SOURCE/
POWER
RESET Rotary encoder
MENU GlideTouch bar
c
MUTE