Alpine DVA-9965 Car Stereo System User Manual


 
32-EN
DVD Setup
DVD Setup Operation
DVD Setup Operation is performed by the remote control unit.
The following 4 steps are common to each of the DVD settings.
Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
2
Press 8 or 9 to select your desired setting item,
then press ENT.
Further items will be displayed.
Setting items:
LANGUAGES / TV SCREEN / COUNTRY CODE / PARENTAL /
DIGITAL OUT / CUSTOM SETUP*
1
*
1
Refer to “Custom Setup” on page 35.
3
Press 8 , 9, ; or : to change the setting, then
press ENT.
4
Press RETURN repeatedly until the SETUP mode
is deactivated.
When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle’s
battery is disconnected, the settings will be cleared and will return
to the factory settings.
RETURN
L
CLR
;
8
:
ENT.
9
number
keys
(0 to 9)
SETUP
LANGUAGES
TV SCREEN 16 :9(WIDE)
COUNTRY CODE US–8583
PARENTAL OFF
DIGITAL OUT
CUSTOM SETUP
SETUP
Setting the language
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (Not all discs
allow changing the default language. If not, the factory default
language applies.)
Setting item: LANGUAGES
Further setting items: AUDIO / SUBTITLE / MENU
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the
subtitles displayed on the
screen.
MENU:
Set the language used for the
menus (title menu, etc.).
Setting contents:
AUTO
1
/ ENGLISH / JAPANESE / GERMAN / SPANISH /
FRENCH / ITALIAN / PORTUGUESE / RUSSIAN / CHINESE /
OTHER
2
Press 8,9, ; or : to select your desired language, then press
ENT.
1 AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
2 OTHER:
Set this to play the disc with a language other than one of
the languages displayed. Press ENT. then use the number
keys “0” to “9” to input the 4-digit language code. Then
press ENT. again. For the language codes, refer to “List of
Language Codes” (page 58).
If you change the language setting when the disc is inside, the
setting is decided with one of the following operations.
-Turn OFF the main unit.
-Switch the source on the head unit.
To temporarily change the language of the current disc, either do
so from the DVD menu or using the operation described in the
section “Switching the Audio Tracks” (page 18).
If the disc does not include the selected language, the disc’s default
language is set.
Languages set upon shipment from the factory:
Audio language: AUTO
Subtitle language: AUTO
Menu language: AUTO
Press RETURN to return to the previous display.
LANGUAGES
AUDIO AUTO
AUTOS
AUTO
UBTITLE
SETUP
MENU