Alpine DVA-9965 Car Stereo System User Manual


 
22-EN
Adjusting and Storing the Graphic Equalizer
Curve
You can modify the equalizer settings to create a response curve more
appealing to your personal taste. To adjust the graphic equalizer
curve, set the EQ mode to G.EQ. For details, refer to “Setting User’s
EQ mode” (page 21).
1
Press and hold MENU for at least 2 seconds.
2
Select the Graphic EQ mode by sliding your finger
on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Graphic EQ
mode.
3
Press BAND to select the band to be adjusted.
BAND1 BAND2 ... BAND9 BAND1
4
Adjust the level by turning the Rotary encoder.
Adjustable output level: ±7step (1step:1.3 dB)
5
To adjust another band, repeat steps 3 and 4, then
adjust all bands.
6
When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.
7
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.
8
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
This function is inoperable when DEFEAT is set to ON (page 20).
•IfMENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
If no operation is performed for 60 seconds, the unit will return to
the normal mode.
Recalling the Stored Equalizer Curve
1
Press and hold MENU for at least 2 seconds.
2
Select the Parametric EQ or Graphic EQ mode by
sliding your finger on the GlideTouch bar to the
left or right. Press the GlideTouch bar under the
Parametric EQ or Graphic EQ mode.
3
Press FUNC. or the GlideTouch bar to activate
the preset mode.
4
Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press the GlideTouch bar under
the desired preset. The previously stored
adjustments are recalled.
5
Press and hold MENU for at least 2 seconds to
return to normal mode.
This function is inoperable when DEFEAT is set to ON (page 20).
You can recall the adjusted equalizer curve from “Selecting the EQ
mode (Factory settings)” (page 21).
•IfMENU is pressed while adjusting or setting the items in the
MENU mode, the unit returns to the previous selection screen.
By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
If no operation is performed for 60 seconds, the unit will return to
the normal mode.