Filter
Top Products
35-EN
5
Press RETURN repeatedly until the SETUP mode
is deactivated.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle’s
battery is disconnected, the settings will be cleared and will return
to the factory settings.
Setting the CD Play Mode
The unit can be set to play only the audio data or only the MP3/WMA
files on discs containing both audio data and MP3/WMA data.
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESSED AUDIO
CD-DA: Only CD data can be played
back.
COMPRESSED AUDIO: Only MP3/WMA data can be
played back.
The initial setting at the factory is CD-DA.
• If a disc has already been inserted, perform the setting after you
remove the disc.
• The setting cannot be carried out if an MP3 compatible changer is
used.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.
Setting the Pause Mode
In pause mode, screen blurring may occur. To overcome this, set
AUTO/FIELD/FRAME accordingly.
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to
FIELD or FRAME.
The initial setting at the factory is AUTO.
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO: Stereo Downmix
SURROUND ENCODED: Dolby surround compatible
Downmix
The initial setting at the factory is SURROUND ENCODED.
Custom Setup
Custom Setup Operation
• Custom Setup Operation is performed by the remote control unit.
The following 5 steps are common to each of the Custom
Setup settings. Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
2
Press 8 or 9 to select “CUSTOM SETUP”, then
press ENT.
3
Press 8 or 9 to select your desired setting item,
then press ENT.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE /
DOWNMIX MODE
4
Press 8 or 9 to change the setting, then press
ENT.
RETURN
8
ENT.
9
CUSTOM TUPSE
CD PLAY MO ED CD-DA
SETUP
VCD PLAY MO EDPBCON
PA SEUAUTO
DO NMWIXMOED SURROU DN
MO ED
SETUP
LANGUAGES
TV SCREEN 16 :9(WIDE)
COUNTRY CODE US–8583
PARENTAL OFF
DIGITAL OUT
CUSTOM SETUP
SETUP