AMX MVP-7500/8400 Car Video System User Manual


 
Setup Pages
92
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Environmental acoustics, personal voice level and ambient noise are all deciding factors when setting your mic and panel
sound levels. Consider your environment when adjusting sound levels and use caution so as not to damage the speaker.
WAV files - Supported sample rates
The following sample rates for WAV files are supported by MVP-8400 panels:
Custom Sounds
The custom button hit/miss sound feature allows a user to add one custom button hit and one custom button miss sound
to any user page project. Once the user page is downloaded into the panel, the user can select the custom sounds from
the Audio Setup page.
To add custom sounds to a TPDesign project, import a WAV file into the resource manager. Rename the resource to
"customSingle.wav" for a custom button hit sound or "customDouble.wav" for a custom button miss sound.
Battery Settings/Batteries
The options on the MVP-7500 Battery Settings page (FIG. 84) and the MVP-8400 Batteries page (FIG. 85) allow you to
set power warning preferences, monitor battery status information, and adjust the display times for battery warnings.
This page is populated with information from MVP-BP batteries in the panel, as well as batteries in a connected MVP-
TDS/WDS docking station.
Volume Page (Cont.)
Panel Sounds: Activating the Button Hit button plays a default sound when you touch an
active button.
Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
The Play Test Sound button plays a test WAV/MP3 file over the panel’s
internal speakers.
The singlebeep01 button plays the default single-beep file.
The doublebeep03 button plays the default double-beep file.
The Panel Docking Tone Enabled button enables or disables sound when
the panel is in a docking station or cradle.
The Information button opens a popup explaining procedures for using the
Button Hit, Button Miss, and Panel Docking Tone Enabled buttons.
Supported WAV Sample Rates
48000 Hz 16000 Hz
44100 Hz 12000 Hz
32000 Hz 11025 Hz
24000 Hz 8000 Hz
22050 Hz
FIG. 84
Battery Settings Page (MVP-7500)