Filter
Top Products
Setup Pages
60
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
FIG. 56 Wireless Security: Enterprise Mode
Wireless Security: Enterprise Mode
Security Type: Pressing this field changes the security type being used between EAP-PEAP,
EAP-TTLS, EAP-TLS, EAP-LEAP, and EAP-FAST.
• EAP-PEAP security is designed for wireless environments where it is
necessary to securely transmit data over a wireless network. (Refer to the
EAP-PEAP Settings section on page 67 for details. For information on
uploading a certificate file, refer to the AMX Certificate Upload Utility section
on page 168.)
• EAP-TTLS security is designed for wireless environments where it is
necessary to first have a Radius server directly validate the identity of the
client (panel) before allowing it access to the network. (Refer to the EAP-
TTLS Settings section on page 68 for details. For information on uploading a
certificate file, refer to the AMX Certificate Upload Utility section on
page 168.)
• EAP-TLS security is designed for wireless environments where it is
necessary to securely transmit data over a wireless network by adding an
additional level of security protocol via the use of a private key. (Refer to the
EAP-TLS Settings section on page 70 for details. For information on
uploading a certificate file, refer to the AMX Certificate Upload Utility section
on page 168.)
• EAP-LEAP security is designed for wireless environments where it is not
required to have both a client or server certificate validation scheme in place,
yet necessary to securely transmit data over a wireless network. (Refer to the
EAP-LEAP Settings section on page 64 for details.)
• EAP-FAST security is designed for wireless environments where security
and ease of setup are equally desirable. (Refer to the EAP-FAST
Settings section on page 65 for details.)
SSID: Press this field to enter a 32-character Network Name in the Network Name
keypad.
Identity: Press this field to enter a Username in the Identity (Username) keypad.
Anon. Identity: This field is only enabled when selecting EAP-TTLS and EAP-FAST as a
Security Type. Press this field to enter another Username in the Anonymous
Identity keypad.
Password: Press this field to enter a password for wireless access in the Password
keypad. (NOTE: this field is greyed out when selecting EAP-TLS as a Security
Type.)
Certificate Authority: Press this field to enter the file location for a Certificate Authority certificate in
the Certificate Authority (CA) keypad.
PEAP Version: This field is only enabled when selecting EAP-PEAP as a Security Type. Press
this field to cycle between the available installed versions of PEAP.