Filter
Top Products
Configuring Communications
26
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Automatically set SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Press the Site Survey button.
3. Select a WEP secured WAP from within the Site Survey page, and press the Connect button .
4. Write down the SSID name, Current Key string value, and panel MAC Address information so you can later enter it
into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These values must be identically
reproduced on the target WAP.
Manually set SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Locate the Wireless Security section (FIG. 21).
FIG. 20 Site Survey of available WAPs (Secured WAP shown selected)
FIG. 21 Wireless Settings page
Select a target
WAP with the
desired level of
security
Connecting to the
WAP begins the
communication
802.11g wireless card
You must first take down the SSID name, Current Key string value, and panel MAC
Address information so you can later enter it into the appropriate WAP dialog fields in
order to "sync-up" the secure connection. These values must be identically
reproduced on the target WAP.