Eclipse - Fujitsu Ten CD5030 Car Stereo System User Manual


 
104
Other information
If you have a question:
Other information
Check the items mentioned below before attempting to troubleshoot problems.
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the status of the CD, USB memory, XM
Radio, Sirius Radio, iPod, CD changer or Bluetooth, etc. Refer to the chart for details of the appropriate
remedial action to be taken.
CAUTION
1
2
If a problem occurs, for instance when the main unit does not respond to any button presses, or the
display doesn't work correctly, press the [RESET] button using a paper clip or similar item.
Pressing the [RESET] button will delete all the entries from memory. The settings will return to
those made at the factory prior to shipment.
Information Explanation and remedial action
INFO 1 CD CHANGER SHUTTER IS
OPEN
Close the shutter.
INFO 2 NO DISC IN THE MAGAZINE There is no disc in the magazine or player. Load a disc into
the magazine. (Load a music disc.)
INFO 3 DISC IS DIRTY OR DAMAGED The loaded disc is dirty or upside down. Check its orientation
and whether it is clean.
INFO 5 CD PLAYER AND CD
CHANGER MECHANICAL
FAILURE IS OCCURRING
The CD player and CD changer are inoperative for some
reason. Go through the magazine removal procedure.
If the magazine fails to eject, have your dealer fix the
problem.
For the CD player, hold down the [e (EJECT)] button for
more than five seconds. If no response, contact your
dealer.
INFO 6 INTERNAL TEMPERATURE OF
CD PLAYER AND CD
CHANGER IS HIGH (PICKUP
UNIT PROTECTION)
The temperature in the CD player and CD changer is too
high for operation. Wait till they cool down.
Resume playback after the “High temperature sensed
and CD stopped" display disappears. If the CD still cannot
be played, have your dealer fix the problem.
=4'5'6?DWVVQP