Filter
Top Products
CHAPTER 1: GETTING STARTED
1.4 I NSTALLATION & S ETUP
1.4.1 Installation Precautions
Mounting Guidelines
Avoid mounting the HS500E or its RFID controllers near sources of EMI
(electro-magnetic interference) or near devices that generate high ESD
(electro-static discharge) levels.
Do not route cables near unshielded cables or near wiring carrying high
voltage or high current.
Avoid routing cables near motors and solenoids.
Cross cables only at perpendicular intersections (if at all).
Important Configuration Note
All HS500E Antennas leave the factory configured to the same default IP address –
192.168.0.100. It is recommended that installers attach and configure only one
HS500E Antenna at a time. Connecting multiple HS500E Antennas prior to assigning
each a unique IP address could result in network errors and IP conflicts.
Power Requirements
The HS500E requires a power supply capable of providing 24 volts DC @ 0.5A
(12W).
HS500E – OPERATOR’S MANUAL P/N: 17-1305 REV02 (12-05)
PAGE 16 OF 82