Filter
Top Products
TABLE OF CONTENTS
Command F2: Start/Stop Repetitive Command 33
Command F3: Write IP Address 35
Command F4: Reset Battery Counter 37
CHAPTER 4: ERROR CODES 38
4.1 Error Types 38
4.1.1 Syntax Errors 38
4.1.2 RF Response Errors 38
CHAPTER 5: ETHERNET/IP PROTOCOL 39
5.1 Steps to Configure the HS500E 40
5.1.1 HTML Server and OnDemand Overview 40
5.2 HS500E Node Configuration 40
5.2.1 OnDemand Configuration Page 40
5.2.2 OnDemand Node 01 Configuration Page 42
5.2.3 OnDemand Configuration Page (Summary) 44
5.3 Configuring PLC Controller Tags 45
5.3.1 Controller Tags Summary 45
5.4 Checking OnDemand Status 46
5.5 Using the HS500E with RSLogix 5000 47
5.5.1 Ethernet/IP Handshaking 48
5.5.2 Ethernet/IP Handshaking Example 48
5.6 HTML Server and OnDemand PLC Support 51
CHAPTER 6: MODBUS TCP PROTOCOL 52
6.1 Modbus TCP Overview 52
6.1.1 Modbus TCP Command Structure 52
6.1.2 Modbus TCP Response Structure 54
6.2 Modbus TCP Handshaking 55
6.2.1 Host/HS500E Modbus TCP Handshaking 55
6.2.2 Modbus TCP Command, Response & Handshaking Example 56
CHAPTER 7: RAW TCP/IP PROTOCOL 57
7.1 RAW TCP/IP Overview 57
7.2 RAW TCP/IP Command & Response Examples 58
7.2.1 RAW TCP/IP Command Example 58
7.2.2 RAW TCP/IP Response Example 59
APPENDIX A: IP ADDRESS RESET 60
HS500E – OPERATOR’S MANUAL P/N: 17-1305 REV02 (12-05)
PAGE 6 OF 82