Filter
Top Products
CHAPTER 5: ETHERNET/IP PROTOCOL
5.5 USING THE HS500E WITH RSLOGIX 5000
At this point, communication between the PLC and the HS500E should be properly
configured and a connection established. You can verify the exchange of information
between devices using RSLogix 5000.
Note that under the Ethernet/IP protocol, the HS500E acts as the client and the PLC
acts as the Ethernet/IP server.
Based on the Write Heartbeat Timeout and Read Poll Rate values specified in the
OnDemand Node Configuration section, the HS500E will periodically read from and
write to the specified portions of PLC memory directly with no messaging instructions
or polling required on the part of the PLC.
A screen shot of RSLogix 5000
HS500E – OPERATOR’S MANUAL P/N: 17-1305 REV02 (12-05)
PAGE 47 OF 82