Filter
Top Products
5725A
Instruction Manual
1-4
Where to Go From Here 1-2.
This manual is the operator and service manual for the 5725A. However, because the
5725A operates under the control of the 5700A Calibrator, most operating instructions
for the 5725A are in the 5700A manuals. Topics such as selecting output values,
connecting to a UUT (Unit Under Test), and self calibration are covered in the 5700A
Operator Manual. The list below gives some specific pointers, and the text further on
describes how to use all the manuals to find 5725A information.
For More Information About: Refer To:
• Unpacking and setup Section 2 of this manual
• Installation and rack mounting Section 2 of this manual and the
Y5735/Y5737 Instruction Sheet
• AC line power and interface cabling Section 2 of this manual
• Controls, indicators, and binding
posts
Section 3 of this manual
• 5725A service information Sections 4 through 9 of this manual
• Operating the amplifier Section 3 of this manual and Section 4 of
the 5700A Operator Manual
• Cabling to a Unit Under Test Section 4 of the 5700A Operator Manual
• Self calibration Section 7 of the 5700A Operator Manual
• Full verification Section 3 of the 5700A Service Manual
• IEEE-488 or serial remote operation Section 5 of the 5700A Operator Manual
• 5700A/5725A specifications Section 1 of this manual
• Theory of operation Section 4 and 9 of this manual
• Troubleshooting Section 6 of this manual
• Ordering a part Section 8 of this manual