JVC KDC-BT92SD Car Stereo System User Manual


  Open as PDF
of 41
 
23
|
KDC-BT92SD
English
|
24
Tuner Operation
Function of remote control
Direct Access Tuning
Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• YoucanentertheFMbandfrequencyinstepsofa
minimumof0.1MHz.
PTY (Program Type)
Selecting the Program Type below and searching
for a station.
Program Type Display
Speech “Speech”
Music “Music”
News “News”
Current Affairs “Affairs”
Information “Info”
Sport “Sport”
Education “Educate”
Drama “Drama”
Culture “Culture”
Science “Science”
Varied “Varied”
Pop Music “Pop M”
Rock Music “Rock M”
Easy Listening
Music
“Easy M”
Light Classical “Light M”
Program Type Display
Serious Classical “Classics”
Other Music “Other M”
Weather “Weather”
Finance “Finance”
Children’s programs “Children”
Social Affairs “Social”
Religion “Religion”
Phone In “Phone In”
Travel “Travel”
Leisure “Leisure”
Jazz Music “Jazz”
Country Music “Country”
National Music “Nation M”
Oldies Music “Oldies”
Folk Music “Folk M”
Documentary “Document”
• SpeechandMusicincludetheProgramtypeshown
below.
Speech: Items in the white letters.
Music: Items in the black letters.
1
Select the FM band
Press the [PRESET] button for at least 1 second.
Select “FM”.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter PTY mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “PTY Search”.
4
Select the Program Type
Turn the [VOL] knob.
5
Search for the selected Program Type station
Press the [4] or [¢] button.
6
Exit PTY mode
Press the [MENU] button.
⁄
• Thisfunctioncannotbeusedduringatrafficbulletinor
AM reception.
• WhentheselectedProgramTypeisnotfound,“NOPTY”
is displayed. Select another Program Type.
• The operation ends automatically if you do not operate
within30seconds.
Program Type Preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1
Select the Program Type to preset
Refer to <PTY (Program Type)> (page 23).
2
Enter Program Type Preset mode
Press the [PRESET] button.
3
Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select preset number.
Recalling the preset Program Type
1
Enter PTY mode
Refer to <PTY (Program Type)> (page 23).
2
Enter Program Type Preset mode
Press the [PRESET] button.
3
Select a desired Program Type in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Changing Language for PTY Function
Selecting the Program Type display language as
follows.
Language Display
English “English”
Spanish “Spanish”
French “French”
Dutch “Dutch”
Language Display
Norwegian “Norwegian”
Portuguese “Portuguese”
Swedish “Swedish”
German “German”
1
Enter PTY mode
Refer to <PTY (Program Type)> (page 23).
2
Enter Changing Language mode
Press the [VOL] knob.
3
Select the language
Turn the [VOL] knob and press it when the
desired item is displayed.
Select a language.
 previous next