JVC KDC-BT92SD Car Stereo System User Manual


  Open as PDF
of 41
 
17
|
KDC-BT92SD
English
|
18
USB and SD Setting
You can select following USB and SD Setting items.
1
Select USB or SD source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“Skip Search”
Sets the ratio of skip performed with <Skip
Search> (page 13).
“0.5%”/ “1%”/ “5%”/ “10%”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• Thesettingof“SkipSearch”in<iPod Setting> (page
10) and that in <USBandSDSetting>(page17) are
always the same. Changing the setting of one reflects
the other.
• Thisoperationiseffectiveonlyforthefilesregisteredin
the database created with KENWOOD Music Editor.
Skip Search
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
1
Select USB or SD source
2
Enter File Search mode
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > item.
3
Enter Skip Search mode
Press the [PRESET] button for at least 1 second.
4
Search for music
Operation type Operation
Move between items Turn the [VOL] knob.
Select an item Press the [VOL] knob.
Skip Search Press the [DISP] or [iPod] button.
Keep pressing the button for 1 second or
longer skips songs at 10% irrespective of
the setting.
Sets the ratio of skip
performed
Press the [
4
] or [
¢
] button.
Return to previous item Press the [MENU] button.
After this step, see step 4 of <FileSearch>(page16)
to select a song.
Cancelling the Skip Search
Press the [PRESET] button for at least 1 second.
⁄
• Thisoperationiseffectiveonlyforthefilesregisteredin
the database created with KENWOOD Music Editor.
• Settheratiowith“SkipSearch”in<USB and SD Setting>
(page17).
USB device/ SD card Operation
Function of remote control
Direct Music Search
Searching the music by entering the file number.
1
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2
Enter the music number
Press the number buttons on the remote
control.
3
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
⁄
• DirectMusicSearchcannotbeperformedduringplaying
of “Music Editor” media, Random play, or scan play.
 previous next