JVC KDC-BT92SD Car Stereo System User Manual


  Open as PDF
of 41
 
43
|
KDC-BT92SD
English
|
44
Audio Adjustments
“Sound Elevation” Virtually raises the sound field using
the DSP.
“OFF”/ “Low”/ “Middle”/ “High”
“Volume offset” Sets each source’s volume as a difference
from the basic volume.
“–8” — “0” (AUX: “–8”— “+8”)
“Rear Mute”
Sets the Rear channel Mute.
“ON”/ “OFF”
“SubWoofer Mute”*
Sets the Subwoofer Mute.
“ON”/ “OFF”
“Preset”* Sets the audio preset.
- Audio Preset Memory (page 51).
- Audio Preset Recall (page 52).
“Bass Boost”*
Sets the Bass Boost level in 3 steps.
“OFF”/ “Level1”/ “Level2”/ “Level3”
“Loudness”*
Makes the sounds at high and low
frequencies louder.
“OFF”/ “Low”/ “High”
“Balance”/ “Fader”
Adjusts left/right and front/rear speaker
balance.
(Left) “L15” — “0” — “R15” (Right)
(Rear) “R15” — “0” — “F15” (Front)*
( : Factory setting)
* Thissettingcannotbemadewhen“2Zone”(DualZone
System) is set to ON.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Remarks
• DSP Set
When “DSP Set” is set to “Bypass”, the DSP function is
disabled , and the colored items can not be set.
Audio Control
You can adjust following Audio Setting items.
Display Overview
“SubWoofer Level”*
You can set subwoofer level.
“–15” — “0” — “+15”
“Preset Equalizer”* Sets the sound quality.
- Preset Equalizer curve Select (page
44).
“Manual Equalizer”* Sets the sound quality.
- Manual Equalizer Control (page 45).
“Pro Setup”
“DSP Set”*
“Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
“Car Type”* To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
- Car Type Selection (page 47).
- Speaker Setting (page 47).
- X’Over Setting (page 48).
- Listening Position Selection (page
49).
- Listening Position Fine Adjustments
(page 49).
- Channel Level Fine Adjustments (page
50).
“Speaker Setting”*
“X’Over”*
“DTA Settings”*
“Zone Control” Sets the Dual Zone System.
- Dual Zone System (page 45).
“Sound
Enhancements”*
.
“Supreme”
Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/
SD/CD and iPod source.
“ON”/ “OFF”
“HIGWAY-SOUND”
Compensates the low volume or bass
sound being lost by road noises to make
vocal sound clearer.
“OFF”/ “Low”/ “Middle”/ “High”
“Space Enhancer”
Virtually enhances the sound space using
the DSP.
“OFF”/ “Small”/ “Medium”/ “Large”
“Sound Realizer”
Virtually makes the sound more realistic
using the DSP.
“OFF”/ “Level1”/ “Level2”/ “Level3”
SRC
4
MENU VOL
¢38
Preset Equalizer curve Select
You can select following Equalizer curve.
Display Equalizer curve
“User” User*
“Natural” Natural
“Rock” Rock
“Pops” Pops
“Easy” Easy
“Top 40” Top 40
“Jazz” Jazz
“Powerful” Powerful
“iPod” iPod (During iPod source only)
* TheEqualizercurvesetinthesection<ManualEqualizer
Control> is recalled.
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Preset Equalizer”.
4
Select the Equalizer curve
Turn the [VOL] knob and press it when the
desired item is displayed.
✍ Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1. Enter iPod Equalizer mode
Press the [VOL] knob.
2. Select the iPod Equalizer curve
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• Youcanselectforeachsource.
• HIGHWAY-SOUND
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
This function is not effective for the Tuner source.
• Supreme
Natural sound can be reproduced by restoring the
information lost, or the waveforms deformed, due to
audio compression.
This function is effective for compressed music.
• Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
• Space Enhancer
This function is not effective for the Tuner source.
 previous next