JVC KDC-BT92SD Car Stereo System User Manual


  Open as PDF
of 41
 
57
|
KDC-BT92SD
English
|
58
Bluetooth Setup
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Enter Bluetooth mode
Press the [ ] button.
✍ You can also select from “Settings” in Menu List
mode.
2
Enter Bluetooth device deletion mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Pairing” > “Device
Delete”.
“(name)” is displayed.
3
Select the Bluetooth device
Turn the [VOL] knob.
4
Delete the selected Bluetooth device
Press the [VOL] knob.
5
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Delete” is displayed.
6
Exit BT Settings mode
Press the [ ] button.
⁄
• Whenaregisteredcell-phoneisdeleted,itsPhoneBook,
log, and SMS are also deleted.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Settingonthecell-phonemayberequired.
• Ifnophonebookdataisfoundintheunitevenafter
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
To download from the cell-phone manually
1
By operating the cell-phone, end the hands-free
connection.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• Duringdownloading:
“Downloading” is displayed.
• Aftercompletionofdownloading:
“Completed” is displayed.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message
Press any button.
⁄
• Upto500phonenumberscanberegisteredforeach
registered cell-phone.
• Upto32digitscanberegisteredforeachphonenumber
alongwithupto50*charactersrepresentinganame.
(*50:Numberofalphabeticalphabeticalcharacters.
Fewer characters can be input depending on the type
of characters.)
• Tocanceldownloadingofthephonebookdata,operate
the cell-phone.
Bluetooth device registration test
You can check whether a Bluetooth device can be
registered by operating this unit.
Enter Bluetooth mode
Press the [ ] button for at least 1 second.
Search for a Bluetooth device starts with “Searching”
displayed.
Select the Bluetooth device to test
Turn the [VOL] knob to select Bluetooth device
name.
Enter BT test mode
Press the [VOL] knob for at least 1 second.
“BT Test Mode” is displayed.
4
Transmit the PIN code.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”:Disabled).
Display Description
“PAIRING” Registration in this unit
“HFCONNECT” Hands-free phoning
“AUDCONNECT” Audio playback
“PB DOWNLOAD” Phone Book downloading
Exit BT test mode
Press the [VOL] knob.
 previous next