Filter
Top Products
16
R-K1000
Main unit
Standby Mode
While the Standby indicator on the main unit is lit, the unit is
using a very weak current to maintain the built-in memory.
This is called Standby mode. When the main unit is in this
mode, you can turn it on using the remote control.
System Control Connection
If you use system control connection to connect a DP
-
K1000
(sold separately) to the R
-
K1000, the R
-
K1000 operates as
follows:
When you play a CD on the DP-K1000, input on the
R-K1000 automatically switches to CD and you can use
the R-K1000 remote control to control CD operations
on the DP-K1000.
Operation is linked so that turning the R-K1000 on and
o turns the DP-K1000 on and o also.
When the Dimmer, Display Saver and Auto Power
Save functions are set on the R-K1000, they run on the
DP-K1000 also.
z
z
z
D.AUDIO terminal (P.34)
Connects digital audio
components to this terminal.
Power (P.23)
Turns the unit on or o (Standby).
Standby indicator
Red: Lights in Standby mode.
Orange: Lights in Timer Standby mode.
VOLUME
(P.22)
INPUT SELECTOR (P.23, 32)
Selects the input source (FM, AM, CD,
PHONO, TAPE, AUX, D.AUDIO, D-IN1,
D-IN2 or D-IN3).
PHONES jack (P.15)
Connects the headphones plug here.
Remote sensor
(P.19)
P.CALL (P.26)
In Tuner mode: Recalls a stored
radio station.
Clear A/Indicator (P.49)
Selects the Clear A function.
Lights white when the Clear A function is selected.
Dial lighting
(P.58)
Display
(P.17)
Component Names and Functions