Filter
Top Products
TIMER DISPLAYSLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
VOL
P.CALL
TUNER D.AUDIO CD
BAND
AUX
PHONO
TAP E
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
33
External Components
Related
Information
English
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Connecting Other Accessories (Commercially Available Units) R P.13–15
Audio Settings R P.37 onwards
z
z
Select “INPUT LEVEL”.
Press the [A] or [B] key.
3
Set the input level.
Press the [A] or [B] key.
4
You can adjust the input level in a
range from –3 to +5.
z
Press the [ENTER] key.
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE OUT] terminal will also change.
z
Press the [MODE] key.
2
Press the [ENTER] key.
Select the input source to adjust the input level.
Turn the [INPUT SELECTOR] knob and select the
input source to adjust the input level.
You can set the input level for each of PHONO, TAPE and AUX.z
1
21
English
Operation icons
Explains the procedure for digital
audio players.
Explains the procedure for the radio.
Explains the procedures for external
components.
Explains how to set the sound quality.
Explains how to set up component
units.
Explains how to carry out system
maintenance.
Related functions that
may also be helpful
Explanations of remote
control procedures
Explanations of
main unit procedures
How to Use This Manual