Filter
Top Products
TIMER
DISPLAY
SLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
ClearA
VOL
RC-R0830E
P.CALL
TUNER D.AUDIO CD
BAND
AUX
PHONO
TAP E
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
Setting the TimerSetting the Timer
57
English
To cancel (o ) or reset (on) the timer
When the system is turned on, press the [TIMER] key.
The setting changes each time you press the [TIMER] key.
z
Press the power [K] key to turn the power OFF.
The Standby indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time.z
1313
lit lit
unlit
lit
PROG. 1 set to on PROG. 2 set to on
PROG. 1 and 2 set to
on
Timer o
If there has been a power failure or the system was unplugged
from the wall outlet for some time, the Standby indicator
lights red. In that case, set the time again. (P.52)
z
To modify the program settings, redo the timer settings from the
beginning.
When the system is in Standby mode, you can con rm the timer setting
(on or o ) for 5 seconds by pressing the [F] key.
z
z
Select the input source.
Press the [A] or [B] key.
The input source changes as shown below each time you press the key.
1212
If you select an input source other than “TUNER”, this completes the
settings and “COMPLETE” is displayed brie y, after which the original
display reappears.
If you select “TUNER”, use the [A] or [B] to select a preset number and
then press the [ENTER] key. This completes the settings and “COMPLETE”
is displayed brie y, after which the original display reappears.
z
z
Press the [ENTER] key.
TUNER CD TAPE AUX
D-IN3 D-IN2 D-IN1