Filter
Top Products
TIMER
DISPLAY
SLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
ClearA
VOL
RC-R0830E
P.CALL
TUNER D.AUDIO CD
BAND
AUX
PHONO
TAP E
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
33
External Components
Related
Information
English
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Connecting Other Accessories (Commercially Available Units) R P.13–15
Audio Settings R P.37 onwards
z
z
Select “INPUT LEVEL”.
Press the [A] or [B] key.
33
Set the input level.
Press the [A] or [B] key.
44
You can adjust the input level in a
range from –3 to +5.
z
Press the [ENTER] key.
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE OUT] terminal will also change.
z
Press the [MODE] key.
22
Press the [ENTER] key.
Select the input source to adjust the input level.
Turn the [INPUT SELECTOR] knob and select the
input source to adjust the input level.
You can set the input level for each of PHONO, TAPE and AUX.z
11