Kenwood R-K1000 Car Amplifier User Manual


 
COMPACT DISC PLAYER
STANDBY
/ TIMER
MP3
/
WMA
/
AAC PLAYBACK
English
9
Always install the system on a  at, stable surface. When installing the system on a stand of some sort, be sure to check the
strength of the stand.
The magnets used in the speakers may cause color irregularities on TV or PC screens. Do not set up the speakers too close
to a TV or PC.
z
z
Notes on installing the system
The sound will vary depending on the positioning of the speakers. To get the best possible sound quality, note the guidelines
below.
Ensure that the surroundings for the left and right speakers are as identical as possible. Set up the left and right speakers
away from the wall and hang thick curtains on any windows to minimize echoes or reverberation.
Place the left and right speakers as far apart as possible.
Position the speakers at the same height as your ears when you are using the system.
z
z
z
Getting the best acoustic e ect
Left speaker Right speaker
Main unit
Observe the following cautions when installing the system. Insu cient heat radiation may
build up internal heat and cause a malfunction or re hazard.
Do not place an object that may hinder heat radiation on the system.
Leave the spaces speci ed below around the cabinets of the main unit.
Top panel: 50 cm or more Back panel: 10 cm or more
Install the CD player (DP-K1000 - sold separately) underneath the R-K1000.
Install the system so that the power outlet is easily accessible from the user, and unplug the
power cord from the power outlet immediately in case of a trouble.
Note that the power supply to the system is not shut down completely by simply setting the
power key to OFF.
To shut down the power supply completely, it is required to unplug the power cord.
z
z
z
CAUTION
Installing the System
CD player DP-K1000
(sold separately)