Filter
Top Products
35
206-4278
Exporting a Clone File
This section describes how to export Master TV Setup conguration to a
USB memory device / Clone (.tlx) le.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• If the TV is NOT already in FTG Mode via CPU, complete the Custom
Master TV Setup procedure (see pages 32 to 34).
• If you would like the Target TV(s) to remain in Pass-through Mode after the
Clone le is imported, ensure the Master TV does not have an auto-tuned/
edited channel lineup; otherwise, importing the exported le will result in the
Target TV(s) being congured for FTG Mode via CPU.
• If you intend to use the TV Zoning feature, make sure to assign the
appropriate TV Zone # as described in Reference section, “Using the TV
Zoning Feature,” BEFORE performing the procedure below.
• It is not possible to clone a Master TV’s clock. Either set a Target TV’s
clock manually, or use the Auto Clock setting in the TV setup menus.
• Since the Export Clone File process retrieves the channel lineup from
the CPU, if the TV is currently in FTG Mode via EBL (FTG Channel Map
resides in EBL) it is not possible to export an FTG Channel Map.
Caution: Do not unplug the TV power cord or remove the USB
memory device while exporting is in progress, as doing so may
cause the TV to malfunction or harm the USB device, respectively.
Export Clone File Procedure
1. Ensure the Master TV is set up completely and turned ON.
2. Insert the USB memory device into the USB port on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus (TV is in Pass-through Mode) or the Function Menu (TV is
already in FTG Mode).
4. Use the arrow navigation keys to select/highlight either the Option menu
icon from the TV setup menus or the Lock menu icon from the Function
Menu. Then, press the number “7” key a total of seven times to display the
TV Manager / USB Download Menu.
5. To gain access to the “Export Clone File” option in the TV Manager / USB
Download Menu, key in the following number sequence on the Installer
Remote: 9-8-7-6.
Cloning Procedures
(Continued on next page)
Cloning typically refers to the process of using a Master TV Setup to configure a
Target TV. This section describes how to save (export) a Master TV Setup and then
transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) le.
You can also create an FTG Conguration (.tlx) le using the FTG File Manager and
then use the Import Clone File procedure to transfer the conguration to Target TVs.
Refer to “Creating an FTG Conguration File” on pages 39 to 40, as necessary.
Export Clone File
Previous
OK
►
►
Export Clone File... 25
%
Do not remove the USB from the port! Do not unplug!
xxLX570H-UA00001.tlx
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Export Clone File
Note: TV Manager / Diagnostics
is for service use only.
Select the le name and press OK to start
xxLX570H-UA00001.TLX