Filter
Top Products
12 C4658M-C (6/10)
PRODUCT SERIAL NUMBER LABEL PLACEMENT
Product serial number labels help Pelco’s Product Support identify your system and its factory configuration in case the unit
or its components require service.
A label citing your product’s serial number is attached to the bottom panel of the unit. Because rack mounting or other
installation options may obscure the factory-applied label, two additional labels are provided. Attach one of them to your
product documentation or another product location that will not be obscured by installation. The second label is a spare.
To use these labels:
1. On the bottom panel of your unit, locate two small labels, attached with a yellow sticker that reads, “Extra serial
number labels: remove prior to installation.”
2. Remove the yellow sticker and the labels.
3. Peel away the backing from one label and attach it to this installation manual, other product documentation, or an
unobscured product location.
Figure 2. Product Serial Number Label Placement