Filter
Top Products
C4658M-C (6/10) 37
DESCRIPTIONS OF THE FRONT PANEL INDICATORS
Video presence
Video presence is indicated by one of the following conditions:
• Not Lit: A camera has not been connected yet.
• Green: Camera video is present at the video in connector.
• Red: Video is no longer present; the camera is not functioning properly.
Network status
Network status (connection and speed) is indicated by one of the following conditions:
• Off: The unit is not connected to the network.
• Solid amber: The unit is connected to the network using the 100 Mbps standard.
• Solid red: The unit is connected to the network using the 10 Mbps standard.
• Solid green: The unit is connected to the network using the 1 Gbps standard.
NOTES:
• A blinking light indicates network activity corresponding to the speed based on the color.
• The NET5400T Series video encoder always uses the 100/1000Base-T standard. If the network status light is red,
contact your network administrator or Endura-certified technician.
Pelco badge (power)
The Pelco badge glows blue when the unit has power.
Unit status
Unit status is indicated by one of the following colors:
• Green: The unit is functioning normally.
• Red: The unit is in an error condition.