Pelco NET5400T Car Video System User Manual


 
C4658M-C (6/10) 21
CONNECTING VIDEO INPUT AND OUTPUT DEVICES
The NET5400T Series offers both analog video input and looping video output (available on the 1-channel models).
Figure 13. Video Input and Output
Before installing the unit, make sure the distance from the unit to the video device is less than the maximum distance for
the coaxial cable. Refer to Table A for maximum video coaxial cable distances.
Table A. Video Coaxial Cable Requirements
Cable Type* Maximum Distance
RG59/U 750 ft (229 m)
RG6/U 1,000 ft (305 m)
RG11/U 1,500 ft (457 m)
*Cable requirements:
75-ohm impedance
All-copper center conductor; steel-center conductor cable may result
in poor performance
All-copper braided shield with 95 percent braid coverage
LL
NCCNO A1 A2 A3 A4
CAMERA