Filter
Top Products
C4658M-C (6/10) 33
CONNECTING POWER
This product is intended to be supplied with power by a 12 VDC (except for the NET5404T), 24 VAC, or a PoE power supply
that is UL Listed, Class 2, or a UL Listed ITE power supply marked LPS, such as Pelco's NET5200PS or RK5200PS-5U. One-
and two-channel models can operate from the PoE port.
The unit can be powered from the following sources:
• NET5400PS power supply connects directly to the 4-pin connector on the rear panel of the unit.
• The RK5200PS-5U rack mount kit supplies power through the 4-pin connector on the rear panel of the unit as soon as
it slides into place.
• The 1-channel models support PoE, IEEE 802.3af-2003 (the network port located closest to the Pelco badge).
• The 2-channel models support PoE+, IEEE 802.3at (the network port located closest to the Pelco badge).
Figure 25. Connecting Power
L
L
N
C
C NO A
1
A
2
A
3
A
4