Pelco NET5400T Car Video System User Manual


 
40 C4658M-C (6/10)
Specifications
SYSTEM
Operating System Linux
®
User Interface Remote operation from WS5070, WS5200 software, or VCD5200;
Web-based remote operation is also available
VIDEO/AUDIO
Video Standards NTSC/PAL/EIA/CCIR composite
Video Coding H.264 high, medium, or low profiles
Video Streams 2 independently configurable video streams for each channel;
2 unicast streams for each channel
Video Resolutions NTSC PAL
4CIF 704 x 480 704 x 576
2CIF 704 x 240 704 x 288
CIF 352 x 240 352 x 288
Video Inputs/Connector Type 1, 2, or 4 BNC inputs; Hi-Z/75 ohms impedance
Video Looping 1-channel models only
Audio Encoding G.711 speech codec
Audio Bit Rate 64 kbps
Audio Levels 1 Vp-p (0 dBV) nominal, 1.228 V-p-p (+4 dBU) maximum, 10 kohms
Audio Connectors 1, 3.5 mm monaural
Connector Tip Signal high (input)
Connector Sleeve Common
Audio Input Line in
PTZ CONTROL
PTZ Interface RS-422, video in
PTZ Protocols Pelco D (RS-422), Coaxitron
ALARMS/RELAYS
Alarm Inputs 1, 2, or 4 configurable, 3.3 VDC, 10 kohms, triggered; uses 6 of 16 pins on terminal
block connector; supervised and unsupervised
Relay Output 1, form-C relay, 30 VDC, 1 A; uses 3 of 16 pins on terminal block connector