Pioneer SC-1525-K Car Satellite TV System User Manual


 
Additional information
12
100
En
Internet radio
A USB memory device is not
recognized.
The USB memory device does not support the
mass storage class specifications.
Try using a USB memory device compatible with
the mass storage class specifications. Note that
there are cases where even the audio files stored
on a USB memory device compatible with the
mass storage class specifications are not played
back on this receiver (page 44).
Connect the USB memory device and switch on
this receiver (page 35).
A USB hub is currently being used. This receiver does not support USB hubs
(page 44).
This receiver recognizes the USB memory device
as a fraud.
Switch off and on again this receiver.
A USB memory device is
connected and displayed, but
the audio files stored on the
USB memory device cannot
be played back.
Some formats of USB memory devices, including
FAT 12, NTFS, and HFS, cannot be played back on
this receiver.
Check whether the format of your USB memory
device is either FAT 16 or FAT 32. Note that the FAT
12, NTFS, and HFS formats cannot be played back
on this receiver (page 44).
The file format cannot be properly played back on
this receiver.
See the list of file formats that can be played back
on this receiver (page 45).
Cannot detect USB keyboard. The USB keyboard is routed through a USB hub. This receiver is not compatible with USB hubs.
Plug the keyboard directly into the receiver.
A PS2 keyboard is routed through a PS2/USB
connector.
PS2 keyboards cannot be used with this receiver,
even if routed through a PS2/USB connector. Use
a USB keyboard.
Keyboard is not a USB HID Class device. Some devices will not be detected. Use a USB HID
Class keyboard.
Cannot enter correct text
using the USB keyboard.
Keyboard is not US-international layout keyboard. Use a US-international layout keyboard. NB:
Some characters cannot be entered.
Symptoms Causes Remedies
Cannot access the network.
(“Connection Error” shows in
the display.)
The LAN cable is not firmly connected. Firmly connect the LAN cable (page 33).
The router is not switched on. Switch on the router.
The network device was switched on when this
receiver was already on.
Switch the network device on before the receiver.
Cannot listen to Internet radio
stations.
(“Connection Error” shows in
the display.)
The firewall settings for components on the
network are currently in operation.
Check the firewall settings for components on the
network.
You are currently disconnected from the Internet. Check the connection settings for components on
the network, and consult with your network
service provider if necessary (page 87).
The URL for the Internet radio station is
incorrectly programmed.
Check that the URL was correctly entered when
programming.
The broadcasts from an Internet radio station are
stopped or interrupted.
Broadcasts may be interrupted or suspended by
the radio station.
An Internet radio station is selected whose
protocol this receiver does not recognize.
This receiver does not recognize protocols other
than ‘http’ and ‘mms’.
An Internet radio station had closed or moved. Enter new internet radio station on the Internet
Radio Setup.
Cannot listen to Internet radio
stations. (“File Format Error
shows in the display.)
Broadcast is in a format not compatible with this
receiver.
This receiver cannot play audio in formats other
than MP3 or WMA. Also, even if they are MP3 or
WMA formats, this receiver may not be able to
play back.
Symptoms Causes Remedies
SC-1525_UXJCB.book 100 ページ 2010年4月20日 火曜日 午後7時32分