Filter
Top Products
Control with HDMI function
07
57
En
Chapter 7:
Control with HDMI function
Synchronized operations below with a Control with
HDMI-compatible Pioneer TV or Blu-ray disc player or
with a component of another make that supports the
Control with HDMI functions are possible when the
component is connected to the receiver using an HDMI
cable.
•The receiver’s volume can be set and the sound can
be muted using the TV’s remote control.
•The
receiver’s input switches over automatically
when the TV’s channel is changed or a Control with
HDMI-compatible component is played.
•The receiver’s power is also set to standby, when the
TV’s power is set to standby.
Important
•With Pioneer devices, the Control with HDMI
functions are referred to as “KURO LINK”.
• You cannot use this function with components that
do not support Control with HDMI.
• We do not guarantee this receiver will work with
Pioneer Control with HDMI-compatible components
or components of other makes that support the
Control with HDMI function. We do not guarantee
that all synchronized operations will work with
components of other m
akes that support th
e Control
with HDMI function.
•Use a High Speed HDMI
®
cable when you want to
use the Control with HDMI function. The Control
with HDMI function may not work properly if a
different type of HDMI cable is used.
•For details about concrete operations, settings, etc.,
refer to also the operating instructions for each
component.
Making Control with HDMI
connections
You can use synchronized operation for a connected TV
and up to five other components.
•Be sure to connect the TV’s audio cable to the audio
input of this unit. When the TV and receiver are
connected by HDMI connections, if the TV supports
the HDMI Audio Return Channel function, the sound
of the TV is input to the receiver via the HDMI OUT 1
terminal, so there is no need to connect an audio
cable. In this case, set TV Audio at HDMI Setup to
via HDMI (see HDMI Setup on page 57).
For details, see Connecting your TV and playback
components on page 24.
Important
• When connecting this system or changing
connections, be sur e to switch the power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
•After this rece
iver is co
nnected to an AC outlet, a 2
second to 10 second HDMI initialization process
begins. You cannot carry out any operations during
initialization. The HDMI indicator on the display unit
blinks during initialization, and you can turn this
receiver on once it has stopped blinking.
• To get the most out of this function, we recommend
that you connect your HDMI component not to a TV but
rather directly to the HDMI terminal on this receiver.
•While the receiver is equipped with six HDMI inputs
(BD, HDMI 1 to 5), the Control with HDMI function
can only be used with up to three DVD or Blu-ray disc
players or up to three DVD or Blu-ray disc recorders.
•The Control with HDMI function can be used with a
TV connected to the HDMI OUT 1 terminal, but not
with a TV connected to the HDMI OUT 2 terminal.
HDMI Setup
You must adjust the settings of this receiver as well as the
connected Control with HDMI-compatible components
in order to make use of the Control with HDMI function.
For more information see the operating instructions for
each component.
1 Press on the remote control, then press
HOME MENU
.
2Select ‘
System Setup
’, then press
ENTER
.
3Select ‘
Other Setup
’, then press
ENTER
.
4Select ‘
HDMI Setup
’, then press
ENTER
.
5 Select the ‘
Control
’ setting you want.
Choose whether to set this unit’s Control with HDMI
function ON or OFF. You will need to set it to ON to use
the Control with HDMI function.
When using a component that does not support the
Control with HDMI function, set this to OFF.
• ON – Enables the Control with HDMI function. When
this unit’s power is turned off and you have a
supported source begin playback while using the
Control with HDMI function, the audio and video
outputs from the HDMI connection are output from
the TV.
RECEIVER
SC-1525_UXJCB.book 57 ページ ２０１０年４月２０日 火曜日 午後７時３２分