Filter
Top Products
Basic Setup
04
41
En
6 When you’re finished, proceed to the settings for
other inputs.
There are optional settings in addition to the assignment
of the input jacks:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT. (DVD
and other inputs can be still be selected directly with
the input function buttons.)
• 12V Trigger1/2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 37), select
MAIN, ZONE 2, ZONE 3 or OFF for the corresponding
trigger setting to switch it on automatically along
with the (main or sub) zone specified.
1
7 When you’re finished, press
RETURN
.
You will return to the System Setup menu.
Input function default and possible settings
The terminals on the receiver generally correspond to the
name of one of the input functions. If you have connected
components to this receiver differently from (or in
addition to) the defaults below, see The Input Setup menu
on page 40 to tell the receiver how you’ve connected up.
The dots () indicate possible assignments.
Note
1 Devices connected to 12 volt triggers can be associated with HDMI OUT switching. For details, see HDMI Setup on page 57.
Input
function
Input Terminals
Digital HDMI
Component
DVD COAX-1
a
a.With Control with HDMI set to ON, assignments cannot be made
(see Control with HDMI function on page 57).
IN 1
BD (BD)
TV/SAT OPT-1
a
DVR/BDR OPT-2
a
IN 2
VIDEO OPT-3
a
IN 3
HDMI 1
(HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3
(HDMI-3)
HDMI 4
(HDMI-4)
HDMI 5
(front panel)
(HDMI-5)
INTERNET
RADIO
iPod/USB
XM RADIO
CD COAX-2
CD-R/TAPE
TUNER
ADAPTER
PORT
PHONO
MULTI CH IN
a
SIRIUS
SC-1525_UXJCB.book 41 ページ ２０１０年４月２０日 火曜日 午後７時３２分