Filter
Top Products
SET UP OPERATION
5
En
Loading the batteries
Introductory Information
“AA” IEC LR6 batteries x 2Remote control unit
Checking the Supplied Accessories
Please check that you have received all of the following accessories with the amplifier.
The following marks and symbols are used throughout
this manual:
Provides additional information, precautions,
and advice.
Indicates a blinking button, indicator, or
display.
Indicates a steadily lit button, indicator, or
display.
How to Use This Manual
When you notice a decrease in the operating range of
the remote control, replace all batteries with new ones.
AA dry cell batteries ((“AA” IEC LR6)×2)
\
CAUTION!
Incorrect use of batteries may result in such hazards
as leakage and bursting. Observe the following
precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries
properly according to the marks in the battery case.
• Batteries with the same shape may have different
voltages. Do not use different batteries together.
Preparing the Remote Control
This manual is divided into two main sections :
SET UP
This section explains how to make the necessary
connections from the amplifier to your other audio and
video components. Amplifier operations described later
in this section under the heading “Preparations” enable
you to set up and customize your home entertainment
center.
OPERATION
This section provides complete information about
operation of the amplifier and supplied remote control.
When changing the batteries, it is
recommended that you load new batteries
within five minutes of removing the old
batteries. If not, the preset codes may be
canceled and you will need to set them again
(refer to page 20).
9
(
(
9
memo
memo