Filter
Top Products
Chapter 4: Installation
Mounting The 8570
56
Teklogix 8570 Vehicle-Mount Computer User Manual
Attaching The Cradle To The Cradle Mounting Plate
Next, the 8570 with cradle must be attached to the cradle mounting plate.
• Align the tabs on the rear of the cradle to the tab guides on the mounting
plate and push the cradle back and down.
• Slide the fasteners on the front of the cradle until they snap to the posts on
the mounting plate.
Warning: Never operate the vehicle if the quick-release fasteners are
not locked.
4.2.4.3 Installing The Keyboard Quick-Release Bracket
To assemble and install the Keyboard Quick-Release Bracket (PN 30876-401),
follow the instructions for installing the 8570 Quick-Release Bracket (page 54),
carefully attaching the keyboard to the mounting bracket provided in the kit, and
then to the mounting cradle, as illustrated in Figure 4.4 on page 54.
Place the keyboard in the cradle so that the top is on the same side as the tabs of the
cradle. The bottom of the keyboard should be on the same side as the quick-release
fasteners.
Figure 4.6 Keyboard Quick-Release Bracket (PN 30876-401)