Filter
Top Products
Teklogix 8570 Vehicle-Mount Computer User Manual 77
Chapter 6: Troubleshooting
Software Loading/Installation Procedure
6.5 Software Loading/Installation Procedure
Important: It is critical that you carry out the instructions listed in the appro-
priate section below step
by step, beginning at step 1.
6.5.1 Computers Using Microsoft Windows 98
1. Load/Install Network/Ethernet driver
Go to My computer> update drivers> next> next
Browse> Go to D:\driver\network.
2. Load/Install Video Drivers ATI
Go to My computer
Go to D:\driver\Ati select setup
3. Load/Install Sound drivers
4. Load/Install WaveLan drivers
5. Reboot the 8570
6. Load/Install Touch Screen driver
Run the touch screen install utility located in the drivers directory on the D
drive. You must have a keyboard connected to the unit because the mouse
will stop functioning during this procedure.
Change the device name from “Device 1” to ‘Touch Screen”.
Use “Semtech, ScreenCoder JLT, PS/2 (UPDD)” driver. The PS/2 port is
disabled during setup. Finish the setup using the keyboard.
7. Reboot the unit and calibrate the touch screen (see Appendix C:
“Touch Screen Calibration” for calibration details).