Filter
Top Products
11 English
Basic Operations in the Main Screen
After registering the camera(s), the live video is displayed in the main screen.
The main screen appears immediately after login when a camera has already been registered.
1 Menu bar (see page 13)
You can access various commands for the
VA-SW3050 from the menu bar.
Clicking the menu on the menu bar displays
the pull-down menu. Select the desired
command from the pull-down menu to
execute.
2 Tool bar (see page 15)
The tool bar contains the commands and
information display buttons that are frequently
used.
3 Video display area
Displays the live video and recorded data.
You can use the button on the tool bar to
select the number of cameras to be displayed
(single screen, 4-part split screen or 16-part
split screen) (see page 15).
MEMO:
In the following cases, only the following
message is displayed respectively with no
video.
When image signals are interrupted for
approximately 30 seconds or more:
Communication Error
When no camera is registered:
SANYO
When there is no video to display during
playback operation:
No Data
4 Close button
Clicking the button closes the screen and the
software is stored in the task tray icon (see
page 6).
4
3
1
2
A
B
C
D
L9EBB_WA(VA-SW3050)(GB).book 11 ページ ２００６年４月２１日 金曜日 午後４時２５分