Filter
Top Products
31
Watching TV
Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “WSS”, and then press
ENTER.
3
Press
c
/
d
to select “On” or “Off”, and then
press ENTER.
4
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “4:3 mode”, and then
press ENTER.
3
Press
c
/
d
to select “Panorama” or “Normal”,
and then press ENTER.
4
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
Picture size settings
Selected item Description
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Press a/b to select “Quick start”, and then
press ENTER.
3
Press c/d to select “On” or “Off”, and then
press ENTER.
4
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Selected item Description
On The TV quickly starts up from standby,
19 W or more of power consumption is
required during standby.
Off Power consumption is less than 1 W.
LC-40LE700X_en_d.indd 31LC-40LE700X_en_d.indd 31 7/8/09 9:58:31 AM7/8/09 9:58:31 AM