Filter
Top Products
On Off
Auto power on
AQUOS LINK control
Selecting recorder
Selecting channel key
Using genre info.
Setting auto power on by AQUOS LINK
52
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press
a
/
b
to select “Selecting recorder”, and
then press ENTER.
2
Select the recorder, and then press ENTER.
3
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
AQUOS LINK
Press MENU to exit.
4
AQUOS LINK control
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Input Location
INPUT1
INPUT2
[1. 0. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
NOTE
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external
source
’s indication changes (e.g. from “INPUT 1” to
“INPUT 1 (Sub)”).
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Input Location
INPUT1
INPUT1 (Sub)
INPUT2
[1. 0. 0. 0]
[1. 1. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
AQUOS LINK control
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press
a
/
b
to select “Using genre info.”, and
then press ENTER.
2
Press
c
/
d
to select “On”, and then press
ENTER.
3
Using genre info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included in the digital broadcast.
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Press PLAY
I
to start playback of a title.
• See page 53, section “Playback of titles using
AQUOS LINK” if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
2
Press FWD
J
to fast forward.
Press REV
G
to reverse.
Press STOP
H
to stop.
Press POWER to turn the HDMI-connected
device on/off.
3
Repeat steps 1 to 3 in AQUOS LINK control.
1
Auto power on
If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press
a
/
b
to select “Auto power on”, and
then press ENTER.
2
Press
c
/
d
to select “On”, and then press
ENTER.
3
Press MENU to exit.
4
NOTE
• The factory default for this item is “Off”.
1
Open the remote control unit’s fl ip cover.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV’s remote control
unit.
Press
a
/
b
to select “Selecting channel key”,
and then press ENTER.
2
Press
c
/
d
to select “On”, and then press
ENTER.
3
Press
a
/
b
to select the input source of the
connected HDMI device you want to control
using the TV
’
s remote control unit, and then
press ENTER.
4
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
INPUT1 On
On
On
Off
Off
Off
INPUT2
INPUT3
Setting channel select key for AQUOS LINK
compatible device via the HDMI input
AQUOS LINK control
LC-40LE700X.indb 52LC-40LE700X.indb 52 6/26/09 4:26:12 PM6/26/09 4:26:12 PM