Sharp LC-40LE700X Car Satellite TV System User Manual


 
61
1
2
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
Press DISPLAY. The channel display will
appear on the display.
3
4
Press DISPLAY again. The channel display
about three seconds on the screen. Time
information will continuously display on the
lower right of the screen.
Even when you change the TV channel, you
can display the time information with steps 2
to 3 above.
NOTE
The time display cannot be stored once the power is turned
off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the upper-right corner of the screen by pressing MENU.
Time display
You can display the time information included in the
Teletext broadcast.
1
2
3
4
MENU
[
Setup
...
Text language
]
West Europe
East Europe
Greek/Turkish
Cyrillic
Teletext language settings
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Text language”, and
then press ENTER.
Teletext language setting
If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Press
a
/
b
to select receivable teletext
broadcasting language in your country.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
• West Europe – English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe – Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish – English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic – English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
Teletext function
1
2
– +
3
4
Subpage screen
Press
m
to display Teletext.
Press
1
to display the subpage as shown
below.
Select the desired subpage by using CH
r
/
CH
s
, Red or Green.
0
9 directly selects the desired subpage.
Press
1
to exit the subpage screen.
Displaying Subpages
You can display subpages as they are transmitted.
LC-40LE700X.indb 61LC-40LE700X.indb 61 6/26/09 4:26:21 PM6/26/09 4:26:21 PM