Filter
Top Products
TASCAM MD-CD1MKIII 25
Operation basics
1 Select CD Menu or MD Menu.
Front panel operation:
Press the CD MENU button or the MD MENU button
to call up the desired menu.
Remote control operation:
Press the MENU button and either the CD Menu
or the MD Menu is called up, depending upon the
position of the CD/MD selector.
The sub-menu screen appears.
CD PLAY?
NOTE
In Menu mode, the
•
CD or MD indicators flashes to
indicate which menu is called up.
When a menu is chosen for a deck that is not the
•
display master, the display master indicator will remain
lit, while the indicator for the menu mode deck will
begin flashing. If the menu for the display master deck
is selected, its indicator will begin flashing.
2 Select the desired sub-menu.
Front panel operation:
Use the MULTI JOG dial to select, then press the
MULTI JOG dial or the YES button.
Remote control operation:
Use the MENU –/+ button to select, then press the
ENT/YES button.
The screen for the selected menu option will be
displayed.
PLAY MODE?
NOTE
To return to the sub-menu selection screen from a menu
option selection screen, press the NO button on either
the front panel or the remote control unit.
3 Select the desired menu option.
Front panel operation:
Use the MULTI JOG dial to select, then press the
dial.
Remote control operation:
Use the MENU –/+ button to select, then press the
ENT/YES button.
The setting screen will be displayed.
Mode>Cont
NOTE
To return to the menu option selection screen, press the
NO button on either the front panel or the remote control
unit. However, if the NO button is pressed for an EDIT
menu option, you will exit the Menu mode.
4 Settings
Front panel operation:
Use the MULTI JOG dial to select, then press the
dial.
Remote control operation:
Use the MENU –/+ button to select, then press the
ENT/YES button.
NOTE
Some menu options exist for confirmation purposes
•
only, and setting cannot be performed.
For MD Editing Menu operation, refer to “MiniDisc
•
editing” on page 40.
For Title Menu operation, refer to “Title input” on page
•
44.
5 How to exit Menu mode after setting (or
confirmation), during menu option display.
Front panel operation:
Press the CD MENU or MD MENU button
corresponding to the current Menu mode.
Remote control operation:
Press the MENU button.
The CD or MD indicator will stop flashing.
NOTE
The
IR REMOTE?
option on the SYSTEM sub-menu of
the CD menu enables you to set the unit so that it will not
respond to remote control button operations (excluding
certain buttons). Set the option to
Enable
so that the
unit will respond to all remote control button operations.
6 – Menu Operation