Tascam MD-CD1MKIII Car Video System User Manual


 
48 TASCAM MD-CD1MKIII
13 – Locking the panel operations
You can lock the entire panel or individual decks in order
to prevent misoperation. The entire panel can be locked
after a deck has been locked. (If both locks are enabled,
warning messages that appear refer to the lock of the
entire panel.)
NOTE
Even if the lock of the entire panel is released, the lock of
an individual deck is not released.
Locking the entire panel
Press and hold the TIME and DISPLAY keys simultaneously
to lock/unlock the entire panel.
When the keys are locked,
LOCKED
appears on the
display.
When the keys are unlocked,
UNLOCKED
appears on
the display.
If a button is pressed while the keys are locked,
Key
Locked
appears indicating that key operations are
disabled.
The key lock setting is retained even when the power is
turned off.
Locking individual decks
Select CD deck only, MD deck only, or EJECT button only
under
PANEL LOCK?
in the SYSTEM submenu of the
CD menu.
When
none
is selected
The lock is released, and all key operations are enabled.
When
CD
is selected
Key operations for the CD deck are disabled.
Keys disabled: KEY, PITCH, Ô/Â, ¯/, STOP,
PLAY, READY, OPEN/CLOSE
In addition, the MULTI JOG dial cannot be used to
operate CD.
If a button on the CD deck is pressed,
CD Locked
appears indicating that key operations are disabled.
When “MD” is selected
Key operations for the MD deck are disabled.
Keys disabled: Ô/Â, ¯/, DUBBING, INPUT
SEL, STOP, PLAY, READY, RECORD, EJECT, MD MENU
If a button on the MD deck is pressed,
MD Locked
appears indicating that key operations are disabled.
In addition, the MULTI JOG dial cannot be used to
operate MD.
When “EJECT” is selected
The OPEN/CLOSE key on the CD deck and the EJECT key
on the MD deck are disabled.
If the OPEN/CLOSE key on the CD deck or the EJECT key
on the MD deck is pressed,
Eject Locked
appears
indicating that key operations are disabled.
NOTE
Even if the OPEN/CLOSE and EJECT keys are disabled, a
disc is automatically loaded when the CD tray is pushed in
or an MD is inserted.