90 MX6 Utilities
MX6 Reference Guide E-EQ-MX6RG-E-ARC
RASMan Configuration File
RASMan application settings are stored in the Settings section of the \IPSM\RASMan.EXM file.
See “EZConfig Editor” for instructions on changing the values in the RASMan configuration file.
Key Description Valid Values
AutoConnectOnDock
Controls an automatic RASMan
connection when the terminal is
docked and removed from the
communication peripheral.
Default value: 1
0=Disabled; the RASMan
connection must be launched
manually.
1=Enabled; RASMan connects
when the terminal is docked in
the cradle and disconnects with
the terminal is removed.
Debug
Enables and disables the creation
of a debug log file.
Default value: 0
0=Disabled; no log file
1=Enabled; Creates a log file of
RASMan activity in the \IPSM
folder.
AutoConnectOnStartup
Controls the automatic
connection when RASMan is
started.
Default value: 1
0=Disabled; the PPP connection
is not established when
RASMan is started.
1=Enabled; the PPP connection
is established when RASMAN is
started.
Connectoid
Indicates the connection
RASMan should use.
Default value: `USB Connection
`USB Connection
`115200 Default
`19200 Default
`38400 Default
`57600 Default
Note: These values must be
typed in exactly as they appear
here.
CommandLine
Command to execute on a
successful connection.
Default value: Empty
Leave empty if no action is
required.
CommandArgs
Command arguments for the
CommandLine setting.
Default value: Empty
Leave empty if no action is
required.
ConnectDelay
Specifies the amount of time to
wait before establishing the PPP
connection after RASMan is
started.
Default value: 2000
(milliseconds)
Enter values in milliseconds.
