Programs 67
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Getting Started
The AEGIS client is initially started from the start menu. Initially it will open on the Main screen.
When closed, the client runs in the background and it’s icon is present in the system tray. The
color of the icon indicates the state of the client authentication.
When Using LEAP
With Meetinghouse Version 2.0.0 (or later) you must enable “Provide Encryption Key
Dynamically” when using LEAP on the Aegis client.
When Using WEP
If using only WEP, disable the Meetinghouse client and configure the WEP key in the radio
utility:
Ver 7.03
Configure WEP key : Start | Settings | Connections tab | Connections tab | Pegasus Settings |
Config tab.
Set AP Search Threshold to Medium using the Advanced Profile Settings screen.
Ver 7.11 and Ver 7.13
Configure WEP key : Start | Settings | Connection tab | 802.11b | Config tab.
Set AP Search Threshold to Medium using the Advanced tab.
When Using WPA
To configure the radio for WPA functionality the Pegasus Settings/802.11b configuration tool is
not used. All configuration is done with the Meetinghouse Aegis supplicant.
WPA instruction is located in Chapter 7 “Wireless Network Configuration” only.
