184 Power Tools EZConfig Utilities
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Key Description Available Values
EPSParm When PowerMode is set to 3 (Auto
Enable), this parameter specifies
radio vs. battery performance.
Default value: N/A
X=A value between 1 and 10, where:
1=Best Radio Performance (Minimum)
10=Best Battery Life (Maximum)
NetworkType Determines the type of network the
radio should access.
Default value: 1
0=AdHoc (Minimum)
1=Infrastructure
2=Pseudo-AdHoc
TxRate Defines the transmit rate
Default value: 15
1=1 Mb (Minimum)
2=2 Mb
3=Auto 1/2 Mb
4=5.5 Mb
8=11 Mb
15=Fully Auto (Maximum)
Channel Channel (1-11) of the RF adapter.
In general, this parameter is used
only in AdHoc network mode.
Default value: 10
1=Minimum
11=Maximum
DHCP Enables and disables DHCP
(Dynamic Host Configuration
Protocol).
Default value: 1
0=Disabled; the static IP address in the IP
Address key is used for the radio
interface.
1=Enabled; the IP address for the radio
interface is requested from a DHCP
server.
The remaining keys need to be set when DHCP is disabled. When DHCP is enabled, these
numbers are dynamically requested from a DHCP server.
Key Description
IPAddress
Static IP address for the
radio interface.
Static IP address (a.b.c.d) for the radio interface.
Used when DHCP setting is disabled (set to 0)
SubnetMask
SubNet mask for the
static IP address.
SubNet mask (a.b.c.d) used for the static IP
address when DHCP is disabled
DefaultGate way
Default gateway for the
static IP address.
Default Gateway IP (a.b.c.d) address used when
DHCP is disabled
DNS
Domain name server for
the static IP address.
DNS (Domain Name Server) IP Address used
when DHCP is disabled
Domain
Domain name for the
mobile device
Domain name (xxx.yyy) for the device, when
DHCP is disabled
WINS Windows name server.
INS (Windows Name Server) IP Address used
when DHCP is disabled
