Power Tools EZConfig Utilities 211
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Centering
Centering parameters are valid only when there is an imager installed in the MX6.
The centering feature is used to allow the user to accurately scan a selected barcode among a
group of barcodes that are located closely together. When centering is turned on, the imager will
only decode barcodes that intersect the centering window defined by the user. The centering
window must intersect the center of the barcode.
The default centering settings define a 60 pixel square area in the center of the imager's field of
view.
Key Value Description
CenteringEnable 0
Default: 0
Enable and disables decode centering feature for the decoder.
If CenteringEnable is 1, barcodes will only be decoded if they
are within the centering window specified by CenteringTop,
CenteringBottom, CenteringLeft and CenteringRight.
CenteringTop 215
Default: 230
Specifies the top coordinate of the centering window.
CenteringBottom 265
Default: 250
Specifies the bottom coordinate of the centering window.
CenteringLeft 295
Default: 310
Specifies the left coordinate of the centering window.
CenteringRight 345
Default: 330
Specifies the right coordinate of the centering window.
