Settings Options 125
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Pegasus Settings
Access: Start | Settings | Connections tab | Pegasus Settings
Status Tab
Figure 4-44 WLAN Status and More Info Screens
Current Channel Shows the RF channel currently used by the radio for this session.
Current TX Rate Shows the current transmit rate. This can be 1 Mbps, 2 Mbps, 5.5 Mbps,
or 11 Mbps.
Disable/Enable Radio Tap this button to disable/enable the radio link from the 802.11 radio
card. The radio is set to Enable by default.
Rescan Tap this button to start a rescan process to search for an AP with a
stronger signal in the network.
Link Quality Displays the signal to noise ratio in both percentage and graphical
display. This value will fluctuate. The graphical display is refreshed
every few seconds.
Strength Displays the signal strength of the receive (radio) in both percentage
and graphical display. This value will fluctuate. The graphical display is
refreshed every few seconds.
Station IP Info Displays the current IP address of the radio link to the network.
IP Address Displays the IP address of the radio. Verify configuration information
with your network administrator.
Renew IP Tap this button to renew the IP address from the DHCP server when
automatic DHCP is enabled.
More Info >>> Tap this button to view detailed TCP/IP information.
Ping Tap this button to open the Ping Utility.
BSS ID Displays the Network Name and the MAC address of the access point
the radio card is associated with in the AP mode. This value cannot be
changed by the user.
