Programs 77
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Authentication Profile Select the Client Configuration (user) profile associated with this
network. The drop-down list contains client profile names created in
the User tab of the Client Configuration Area. To open the selected
profile, select it in the drop-down list and tap View. The User tab
opens displaying the profile details. If you tap OK (to save changes)
or Cancel, you are returned to the Profile Info tab.
WEP Mgmt tab
Factory Default Settings
WEP Management tab
Provide encryption key dynamically Enabled
Use key for data encryption Disabled
Use key to authenticate with AP Disabled
Figure 4-12 WEP Mgmt tab
Provide encryption key
dynamically
This option is selected by default.
If this option is selected, the other WEP settings on this page are
disabled.
To enter a custom WEP, de-select this option. The other fields
become active.
Use key for data encryption Select this option to manually enter a WEP key to encrypt your
data to the access point.
You enter that key in the Key field below.
Use key to authenticate
with AP
Select this option if your network does not support 802.1x
authentication and you need to connect to the access point
without username and password authentication.
The key entered below is used to authenticate instead.
