Power Tools EZConfig Utilities 183
E-EQ-MX6RG-E-ARC MX6 Reference Guide
DeviceConfig Sections and Keys
The sections and keys in the DeviceConfig.EXM file are locked, which means that you can change
the value but not the name or description. The description of locked keys contains “[Locked]” next
to the name.
Section Name Description
Connections
Configures communication parameters. There are child sections that
configure the IrDA port, the on-board radios, and the ActiveSync connection.
System Configures basic system settings.
Applications Configures software applications.
Connections Section
The Connections section contains child sections that set communication parameters on the mobile
device.
Beam Section
Key Description Available Values
Enable Enables and disables receipt of
incoming infrared data.
Default value: 0 (Disabled)
If set to 1, incoming infrared data will be enabled.
0=Disabled
1=Enabled
Radio Manager Section
The Radio Manager section configures the on-board radios. There is a child section for each radio.
802.11b Section
The keys in this section configure the 802.11b radio on the mobile device. If there is no 802.11b
radio installed in the device, disable this section.
Key Description Available Values
Enable Enables and disables the 802.11b
radio.
Default value: 1
If enabled, the GSM radio section is
disabled automatically.
0=Disabled
1=Enabled
SSID The security ID used to connect to
network; usually the network name
of the access point or peer station.
Default value: N/A
X=Your network’s SSID
Any=Connect to any network
PowerMode Specifies the power save mode.
Default value: 1
1=Disable; power save mode is not used
2=Always Enable; radio is powered
constantly
3=Auto Enable; EPSParm key defines
radio vs. battery performance.
