Properties
223
Security Remote
Authentication
Servers
(continued)
SMB Server
SMB Server Setup – Specify the setup method for an
SMB server. The options available for SMB servers 1
to 5 are:
Domain Name – Specify a domain name.
Server Name/IP Address – Specify a server name/IP
address.
Xerox Secure Access Settings
Default Prompt – Displays the default prompt message
to be displayed on the Xerox Secure Access login
screen. To change the message, enter it using up to
255 characters.
Default Title – Displays the default title for the Xerox
Secure Access login screen.
Local Login – Specify whether to allow login from the
machine.
Get Accounting Code – Specify whether to perform
account management using account information
received from the Xerox Secure Access server.
Connection Time-Out – Allows you to specify the
connection time-out period with the Xerox Secure
Access server.
IP Filtering The IP Filtering feature provides machine security, by
allowing you to register the IP addresses that are
permitted to communicate with the machine.
IPv4 Filtering
IP Filtering:
• IP Filtering – Select whether to enable the IP
Filtering feature using IPv4 addresses.
IP Filter Rule List:
• Rule Number – Displays entry numbers 1 - 10 for IP
addresses to be filtered.
• Source IP/Mask – Displays the range of the IP
addresses in “IPv4 address/prefix length” format.
• Add – Displays the [Add IP Filter Rule - IPv4] page,
which allows you configure the following settings:
- Source IP Address: Enter an IP address from
which to permit communication with the machine.
- Source IP Mask: Enter the mask address of the IP
address in prefix length format.
• Edit – Displays the [Edit IP Filter Rule - IPv4] page,
which allows you to edit the IP address selected in
[IP Filter Rule List].
• Delete – Deletes the address selected in [IP Filter
Rule List].
IPv6 Filtering
IP Filtering:
• IP Filtering – Select whether or not to enable the IP
Filtering feature using IPv6 addresses.
Feature Setting items
